Vegetable Planter, as the name suggests, is a machine used for vegetable transplanting. For the safety of the machine and the person, it is necessary to master the methods when harvesting the Vegetable. The following editor will introduce you to the precautions for use.
- In the field operation of the unit, the lifting and lowering of the equipment should be operated with the force adjustment hydraulic handle. When in the working state, it should be in the force adjustment position. This is mainly to ensure that the unit has a small range between the tractor and the equipment during operation. Relative floating, when the ground is uneven and the specific resistance of the soil suddenly changes, the up and down movement between the engine and the farm tool can be changed within the range of 3-8 cm, and the tool will not be damaged.
- Vegetables in rhizomes mostly grow in the soil 20-35 cm below the ground surface. Some of the larger and long roots can reach 40-60 cm deep, and the unit workload is relatively large; in some rhizomes, Vegetable has very high water content. It is high, tender and brittle, easy to break and damage, and has high requirements for the mechanized operation of Vegetable Planter. Therefore, in the field operation, the driver's control should ensure that the driver should drive in a straight line as much as possible, and do not change the direction of travel at will. To maintain a straight and stable straight line, the centerline of the supporting resistance during the operation must be at the centerline of the engine (or closer), and the longitudinal axis is the same as the driving direction. Otherwise, a deflection moment will be generated, causing left and right swings to deviate from the forward center. Line, forming line exercise, increase unit work resistance, affect operation efficiency and operation quality.
Third, the unit often encounters turning around, crossing the ridge, and transferring land during field operations. Vegetables in rhizomes mostly grow in the soil 20-60 cm below the ground surface. The resistance of the unit is large. If the unit turns and turns with a working load, the mechanical parts of the traction machine are easy to deform and damage or accelerate wear, so the unit is operating at a distance of 1 to the ground. When turning at -2 meters, when you need to turn, you must first lift the machine and then drive in a straight line. It is not allowed to turn and turn with the work load. Otherwise, the mechanical part of the tractor that is 20-65 cm underground will be affected. The large torque causes the deformation and damage of the mechanical parts of the traction machine or accelerates the wear.
4. Vegetable Planting Machine in late autumn and early winter. Due to the rain in autumn and high soil humidity, the resistance of Vegetable Planter operation is small, but the soil viscosity is large and the cleaning and separation are difficult, so the speed is slow.