The High Pressure Grease Fitting is used for mechanical connection. What should I do if it fails, such as being blocked by grease?
- The grease nozzle is blocked and the grease cannot be injected. You need to use a jack to jack up the car until the steel plate pin is released from the load and there is a gap, and then use a grease gun to try to grease it in.
- If you can get in at this time, it means that the oil hole is pressed and sealed. If you still can't get the butter in this way, it may be that the oil inside has hardened and blocked the oil hole, and you need to use a screw. The pressure generated when the screw is screwed in pushes the butter block apart.
- You can find a few fine-threaded screws with the same diameter as the grease nipple. If you can't drive the butter, you can use the screw inward to solve the problem. Except for some special circumstances, you can put the butter on the oil hole. Block top open. In this way, there is no need to dismantle the steel plate pin, which can solve the problem that the steel plate can not get the butter efficiently and quickly.